manualshive.com logo in svg

Oracle X8-8, Руководство по установке

Поделиться
Скачать
Oracle X8-8 Скачать руководство пользователя страница 86

Access Serial Remote Host Console

5.

To exit the Oracle ILOM Remote System Console Plus, click 

Exit

 in the KVMS

menu.

For more information about Oracle ILOM Remote System Console Plus, refer to the 

Oracle

ILOM Administrator's Guide for Configuration and Maintenance, Firmware Release 4.0.x

 at

https://www.oracle.com/goto/ilom/docs

.

Access Serial Remote Host Console

Before you begin, you can configure properties in Oracle ILOM to make the serial host

console easier to view and to enable logging. For more information, refer to the 

Oracle ILOM

Administrator's Guide for Configuration and Maintenance, Firmware Release 4.0.x 

 at 

https:

//www.oracle.com/goto/ilom/docs

.

This procedure describes how to access the host console remotely. To connect to the host

console locally, see 

“Log In to Oracle ILOM Using a Local Serial Connection” on page 75

.

1.

Log in to the Oracle ILOM CLI using an account with Administrator privileges.

For instructions, see 

“Connecting to Oracle ILOM” on page 73

.

2.

At the Oracle ILOM prompt (->), type 

start /HOST/console

.

The serial console output appears on the screen.

Note - 

If the serial console is in use, stop and restart it using the 

stop /HOST/console

command followed by the 

start /HOST/console

 command.

3.

To return to the Oracle ILOM console, press Esc and then press Shift 9 to enter

the open parenthesis ( character.

Troubleshooting Oracle ILOM

This section addresses two issues that might occur on the Oracle ILOM service processor (SP):

■

You need to reset the Oracle ILOM SP to complete an upgrade or to clear an error.
Resetting the power on the server SP automatically disconnects any current Oracle ILOM

sessions and renders the SP unmanageable until the reset process is complete.

■

As the system administrator, you forgot the 

root

 account password and need to recover it.

86

Oracle Server X8-8 Installation Guide • June 2019

Содержание X8-8







































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды