manualshive.com logo in svg

Oracle X7 series, Руководство администратора

Поделиться
Скачать
Oracle X7 series Скачать руководство пользователя страница 34

Accessing the BIOS Setup Utility

For details, see 

“Accessing the Host Console” on page 38

.

2.

Enter Oracle Hardware Management Pack commands from the operating system

command-line interface.

Related Information

■

“Oracle Hardware Management Pack” on page 17

Use the Oracle Hardware Management Pack

Management Agents

The Oracle Server Hardware Management Agent (Hardware Management Agent) and

associated Oracle Server Hardware SNMP Plugins (Hardware SNMP Plugins) enable you to

monitor and manage your server from the operating system (OS).

This in-band functionality enables you to use a single IP address (the host's IP) for monitoring

your servers without having to connect the management port of the Oracle Integrated Lights

Out Manager (ILOM) SP to the network.

For more information, refer to 

Oracle Server Management Agents User's Guide

 at 

http://www.

oracle.com/goto/ohmp/docs

Accessing the BIOS Setup Utility

The BIOS Setup Utility enables you to configure the system by interrupting the boot process.

The utility is part of the Unified Extensible Firmware Interface (UEFI) embedded on the server,

and does not need to be installed. For a detailed description of the BIOS Setup Utility screens,

see the server service manual.

You can access the BIOS Setup Utility locally by connecting a monitor to the server or remotely

by launching a remote console session from Oracle ILOM. To get started, see the following

sections:

■

“Access the BIOS Setup Utility” on page 35

■

“BIOS Setup Utility Key Mappings” on page 37

■

“Exit the BIOS Setup Utility” on page 38

■

“Common BIOS Setup Utility Tasks” on page 37

34

Oracle X7 Series Servers Administration Guide • September 2017

Содержание X7 series























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды