manualshive.com logo in svg

Oracle X6 series, Руководство администратора

Поделиться
Скачать
Oracle X6 series Скачать руководство пользователя страница 116

Obtaining Software and Firmware Updates

116

Oracle X6 Series Servers Administration Guide • April 2016

Software Release Components

Each software release includes one or more downloadable files (patches). The following table

describes the patches and identifies the tools that can be used to install each.

■

For more information about the operating system command-line application, see your

operating system documentation.

■

Some patches might have files that can't be updated using the tools indicated in this table.

Review the ReadMe file included with the patch before attempting to install an update.

Patch Name

Tools

Description

FIRMWARE

PACK

Oracle ILOM

Oracle Hardware

Management Pack

Updates for system firmware,including Oracle ILOM, BIOS, and

hardware device firmware.

DIAGNOSTICS

Operating system

command-line application

Updates for diagnostic tools, including Oracle VTS. For more
information, refer to 

http://www.oracle.com/pls/topic/lookup?

ctx=OracleVTS7.0

.

OS PACK

Operating system

command-line application

Updates for tools, drivers, and utilities for a specific operating

system. For example, the Windows OS Pack might include

an update to Oracle Hardware Management Pack and an LSI

MegaRAID driver for Windows Server 2012.

An OS Pack is available for each supported operating system

version.

ALL PACKS

Oracle ILOM

Oracle Hardware

Management Pack

Operating system

command-line application

All available updates, except updates to Oracle VTS. This patch

includes the Firmware Pack, all OS Packs, and server-related

documentation.

Obtaining Software and Firmware Updates

Before you can install software and firmware updates, you must obtain them.

You can download updates directly from My Oracle Support. Then, you can use Oracle

Hardware Management Pack, or the operating system command-line to install them. Each tool

is capable of installing a subset of the updates available for the server. To decide which tool is

best suited to update the server, see 

“Software Release Overview” on page 115

.

To obtain updates from My Oracle Support, see :

“Download Firmware and Software From My

Oracle Support” on page 117

Содержание X6 series































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды