Oracle X6 series, Руководство администратора

Страница: 102 / 126

Back Up the Current BIOS Firmware Configuration (Oracle ILOM)
102 Oracle X6 Series Servers Administration Guide • April 2016
Back Up the Current BIOS Firmware Configuration
(Oracle ILOM)
Before you begin, ensure that you have Reset and Host Control (
r
) and Admin (
a
) role
privileges in Oracle ILOM.
1. To back up the current BIOS configuration in the Oracle ILOM web interface,
perform the following steps:
a. Log in to the Oracle ILOM web interface.
For instructions, see “Accessing Oracle ILOM” on page 21 .
b. In the navigation pane, click System Management > BIOS.
c. In the Backup section of the page, select a Transfer Method from the drop-
down list.
d. Specify the destination of the exported configuration.
e. Click Start Backup.
2. To back up the current BIOS configuration in the Oracle ILOM command-line
interface (CLI), perform the following steps:
a. Log in to the Oracle ILOM CLI.
For instructions, see “Accessing Oracle ILOM” on page 21 .
b. Use the following command:
set /System/BIOS/Config/dump_uri=
transfer_method://username:password@host/filepath
Where:
■
transfer_method
is one of the following protocols:
tftp
,
ftp
,
sftp
,
scp
,
http
, or
https
■
username
and
password
are your credentials on the remote system where the backup
file will be saved.
■
host
is the IP address or hostname of the system where the backup file will be saved.
■
filepath
is the relative path to the backup file.
Note - If you transfer the backup file using TFTP, you do not need to provide a
username
or
password
.