Oracle X4 series Скачать руководство пользователя страница 64

Страница: 64 / 240

Configure RAID (BIOS)

■

For servers running Oracle Solaris, after hot-plugging any device, run the

devfsadm -C

command to reenumerate all of the system device nodes before running the

raidconfig

command.

This command does not support some configurations. For details, see:

http://www.oracle.com/goto/ohmp/docs

From the operating system command line, type:

raidconfig

subcommand

where

subcommand

is one of:

■

list

: List information on controllers, RAID volumes and disks, including disks not in a

RAID volume. Specific devices can be selected for display.

■

create

: Create a RAID volume.

■

delete

: Delete a RAID volume.

■

add

: Add a specified disk or spare.

■

remove

: Remove a specified disk or spare.

■

modify

: Modify a RAID volume or a disk.

■

start

: Start a maintenance task.

■

stop

: Stop a maintenance task.

■

restore

: Find the RAID configuration saved on a disk and restores it.

■

clear

: Clear the RAID configuration saved on the disks of a defined controller.

■

export

: Generate an XML file from a RAID configuration.

■

import

: Read in a RAID configuration and create RAID volumes and spares.

For more details, see:

http://www.oracle.com/goto/ohmp/docs

Configure RAID (BIOS)

Use this task to configure RAID from the BIOS Setup Utility.

Oracle X4 Series Servers Administration Guide • April 2016

Содержание X4 series

















































































































































































































































Результаты поиска

Содержание X4 series

Отзывы:

Похожие инструкции для X4 series

Бренды по названию

Популярные бренды

Oracle X4 series, Руководство администратора

Результаты поиска

Содержание X4 series

Отзывы:

Похожие инструкции для X4 series

Бренды по названию

Популярные бренды