Oracle X4 series Скачать руководство пользователя страница 53

Страница: 53 / 240

Power On Host Using the Power Button

Caution -

Data loss. An immediate shutdown abruptly closes all applications and files without

saving changes.

Caution -

To completely power off the server, you must disconnect the power cords from the

back panel of the server.

Power On Host Using the Power Button

Ensure that the power supplies are connected to a power source and that the OK

status indicator is blinking.

Verify that the server is in Standby power mode.

Locate the Power button on the front panel.

Note -

The Power button is recessed on most systems.

Refer to your installation guide for the exact location.

Press the power button.

Use a stylus or other pointed, non-conducting object if necessary.

The host boots and the server enters Full power mode. The OK status indicator goes steady ON

when the host is fully booted.

Power Host On and Off (Oracle ILOM)

You can use Oracle Integrated Lights Out Manager (ILOM) to remotely the host power on or

off.

Before You Begin

This procedure provides web and command-line interface (CLI) instructions for a server service

processor (SP).

■

“Accessing

Oracle ILOM” on page 38

Controlling Server Power

Содержание X4 series

















































































































































































































































Результаты поиска

Содержание X4 series

Отзывы:

Oracle X4 series, Руководство администратора, Страница: 53 / 240

Результаты поиска

Содержание X4 series

Отзывы: