Oracle SUN X4-8, Руководство по обслуживанию, Страница: 111 / 274

Control the Locator Indicator Locally
2.
In the Actions section, verify that the Locator indicator is off, and then click the
Turn On button.
3. Click OK.
The Locator indicator on the Summary screen changes to indicate the status of the Locator
indicator.
Control the Locator Indicator Locally
Note - This procedure is performed locally and requires physical access to the server front
panel.
Use this procedure to turn off or to turn on the Locator indicator.
Before You Begin ■
You must be physically present at the server.
■
For button and indicator location information, see “Front Indicator Module (FIM)
Panel” on page 34 .
To control the Locator indicator locally, do one of the following:
■ To turn off the blinking Locator indicator, press the Locator indicator button.
■
To turn on the Locator indicator, press the Locator indicator button.
Note -
Some Oracle ILOM security procedures require that you turn on the Locator indicator
locally, as part of a physical presence verification step.
■
To perform a lamp test of all front panel indicators, press the Locator
indicator three times within a five-second period.
Preparing for Service 111