manualshive.com logo in svg

Oracle SUN X4-8, Руководство по установке

Поделиться
Скачать
Oracle SUN X4-8 Скачать руководство пользователя страница 128

Oracle VM Configuration Worksheet

Oracle VM Configuration Worksheet

Before configuring the Oracle VM server, use the worksheet in this section to gather the

information you need.

Information for Configuration

Description or Example

Your Answers

Oracle VM server root account

password

Choose a root password; there are

no restrictions on the characters or

length.

 

Oracle VM agent password

Choose an Oracle VM agent

password; password must be at least

six characters.

 

Network interface

Supply the interface (eth#) to be used

to manage the server.

 

Static IP address

Supply the IP address for the server.

A static IP address is required.

Example: 192.0.2.0

 

Netmask

If the server is part of a subnet,

supply the netmask of the subnet.

Example: 255.255.0.0

 

Gateway

If the server is accessed via a

gateway, supply the IP address of the

gateway.

 

DNS server

Supply the IP address for the domain

name server (DNS). One (and only

one) DNS is required.

 

Host name

Supply the fully qualified domain

name for the server.

Example: xxx.oracle.com

 

Configure the Preinstalled Oracle VM Server

These instructions describe only how to configure preinstalled Oracle VM server on your

server. Oracle VM also has other components, such as Oracle VM Manager, that must be

installed or already operational to support the virtual machine environment.

1.

Log in to Oracle ILOM, either locally from a serial connection or remotely using

an Ethernet connection.

See 

“Connecting to Oracle ILOM” on page 53

.

128

Sun Server X4-8 Installation Guide • December 2015

Содержание SUN X4-8



























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды