Oracle Sun Server X4-4, Руководство по обслуживанию

Страница: 60 / 292

Assign Serial Port Output Using the Web Interface
60 Sun Server X4-4 Service Manual • October 2015
1.
Log in to the service processor Oracle ILOM web interface.
To log in, open a web browser and direct it using the IP address of the server SP. Log in as root
or a user with administrator privileges. See Oracle X4 Series Servers Administration Guide .
The Summary screen appears.
2.
In the ILOM web interface, select ILOM Administration --> Connectivity from the
navigation menu on the left side of the screen.
3. Select the Serial Port tab.
The Serial Port Settings page appears.
Note -
The serial port sharing setting by default is
Service Processor
.
4.
In the Serial Port Settings page, select
Host Server
as the serial port owner.
5. Click
Save
for the changes to take effect.
6.
Connect a serial host to the server.
Ethernet Port Boot Order and Device Naming
This section contains information about the boot order and device naming for the four
10 GigabitEthernet ports on the back panel of the server (see “Back Panel Connector
Locations” on page 58 ). From left to right, the two bottom ports are NET 0 and NET 1; the
two top ports are NET2 and NET 3, as shown in the following illustration.