manualshive.com logo in svg

Oracle Sun Server X4-4, Руководство по обслуживанию

Поделиться
Скачать
Oracle Sun Server X4-4 Скачать руководство пользователя страница 101

Power Off, Remote (Oracle ILOM Web Interface)

Preparing to Service the Server

101

->

2.

At the prompt, type one of the following commands:

■

For 

graceful

 power off:

stop /System

■

For 

immediate

 power off:

An immediate shutdown should be used in emergency situations or when you know that the

loss of data is nonexistent or acceptable.

stop -force /System

Next Steps

■

“Managing the Locator Indicator” on page 104

■

Oracle Integrated Lights Out Manager 3.2 Documentation Library at: 

http://www.oracle.

com/goto/ILOM/docs

Power Off, Remote (Oracle ILOM Web Interface)

You can use the Oracle ILOM web interface to remotely power off the server to standby power

mode.

Before You Begin

“Power Modes, Shutdowns, and Resets” on page 103

1.

Log in to the service processor Oracle ILOM web interface.

To log in, open a web browser and enter the IP address of the server SP. Log in as root or

a user with administrator privileges. For more information, see 

Oracle X4 Series Servers

Administration Guide 

.

The Summary screen appears.

2.

In the Actions section of the Summary screen, verify that the power state is ON.

3.

To perform a graceful power off of the server, click the Turn Off button.

Power off options are available in the Host Management > Power Control screen.

4.

Click OK.

Next Steps

■

“Managing the Locator Indicator” on page 104

■

Oracle Integrated Lights Out Manager 3.2 Documentation Library at: 

http://www.oracle.

com/goto/ILOM/docs

Содержание Sun Server X4-4





































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды