Oracle Sun Server X4-4, Руководство по установке, Страница: 55 / 148

Logging In to Oracle ILOM
Logging In to Oracle ILOM
The procedures in this section enable you to test that the assigned settings are working correctly
and to establish a connection to Oracle ILOM locally and remotely.
■
To log in locally, see “Log In to Oracle ILOM Using a Local Serial
Connection” on page 55 .
■
To log in remotely, use the IP address, hostname, or IPv6 local link name assigned to the
server SP and follow the instructions in “Log In to Oracle ILOM Using a Remote Ethernet
Connection” on page 56 .
Log In to Oracle ILOM Using a Local Serial
Connection
This procedure does not require that you know the IP address of the server SP. It does require
that you have an Oracle ILOM Administrator account.
Note -
The default Oracle ILOM Administrator account shipped with the server is
root
and its
password is
changeme
. If this default Administrator account has since been changed, contact
your system administrator for an Oracle ILOM user account with Administrator privileges.
Before You Begin
You must have already connected a serial cable from a terminal (or terminal emulation client)
to the SER MGT port on the back of the server. For more information on this connection, see
“Cable the Server” on page 49 .
1. At the terminal (or terminal emulation client), ensure that the following serial
communication settings are configured:
■
8N1: eight data bits, no parity, one stop bit
■
9600 baud
■
Disable hardware flow control (CTS/RTS)
2.
At the terminal keyboard, press Enter to establish the serial console connection
to Oracle ILOM.
A login prompt to Oracle ILOM appears.
Connecting to Oracle ILOM 55