manualshive.com logo in svg

Oracle Sun Server X4-4, Руководство по установке, Страница: 133 / 148

Поделиться
Скачать
Oracle Sun Server X4-4 Скачать руководство пользователя страница 133

Use the Oracle ILOM Web Interface to Power On the Server

Use the Oracle ILOM Web Interface to Power On

the Server

1.

Log in to the Oracle ILOM web interface using an Administrator account.

The Oracle ILOM web interface System Information > Summary page appears.

2.

From the Summary page, click the Turn On button from the Actions box.

Main power is applied to the server. After a short period, the 

power state

 Off indicator lights

green and the Turn On button changes to a Turn Off button.

Next Steps

“Viewing BIOS Messages” on page 133

Viewing BIOS Messages

Before You Begin

The BIOS startup messages can be viewed at the server using a KVM, or remotely using the

Oracle ILOM Remote Console Plus feature.

1.

When the system is powered on, the initial BIOS screen is displayed.

This screen provides information about the BIOS and server. At this time, internal resources

such as CPUs and memory are scanned and trained. Progress is displayed at the bottom of the

screen along with checkpoint status codes. Resets might also occur during this process. Refer to

the 

Service Manual

 for status code information.

Controlling System Power and Viewing BIOS Messages

133

Содержание Sun Server X4-4





















































































































































Отзывы:

Нет отзывов