manualshive.com logo in svg

Oracle Sun Server X4-4, Руководство по установке, Страница: 131 / 148

Поделиться
Скачать
Oracle Sun Server X4-4 Скачать руководство пользователя страница 131

Controlling System Power and Viewing BIOS

Messages

This section describes how to control system power and view BIOS messages. It includes the

topics shown in the following table:

Description

Links

Power on the server and view BIOS messages.

“Powering On the Server and Viewing BIOS

Messages” on page 131

Power off the server if an error occurs.

■

“Powering Off the Server for Orderly

Shutdown” on page 135

■

“Powering Off the Server for Immediate

Shutdown” on page 138

Reset the server.

“Reset the Server” on page 140

Powering On the Server and Viewing BIOS Messages

Use the procedures in one of the following sections to apply main power to the server and view

BIOS messages.

■

“Use the Power Button to Power On the Server” on page 131

■

“Use the Oracle ILOM CLI to Power On the Server” on page 132

■

“Use the Oracle ILOM Web Interface to Power On the Server” on page 133

■

“Viewing BIOS Messages” on page 133

Use the Power Button to Power On the Server

Before You Begin

The power cords must be connected and the server in standby power mode before applying

main power. See 

“Connect the Power Cords” on page 50

.

Controlling System Power and Viewing BIOS Messages

131

Содержание Sun Server X4-4





















































































































































Отзывы:

Нет отзывов