manualshive.com logo in svg

Oracle Sun Server X4-4, Руководство по установке, Страница: 112 / 148

Поделиться
Скачать
Oracle Sun Server X4-4 Скачать руководство пользователя страница 112

Oracle Solaris Operating System Documentation

5.

Follow the Oracle Solaris installer on-screen prompts to configure the operating

system.

Use the information gathered in 

“Oracle Solaris OS Configuration Worksheet” on page 107

to help you enter the system and network information as you are prompted.
The screens that are displayed will vary, depending on the method that you chose for assigning

network information to the server (DHCP or static IP address).
After you have entered the system configuration information, the server completes the boot

process and displays the Oracle Solaris login prompt.

See Also

For information on using the Oracle Solaris OS, including updating and registration, see

“Oracle Solaris Operating System Documentation” on page 112

.

Oracle Solaris Operating System Documentation

Oracle Solaris operating system documentation is available from the Oracle documentation web

site at:

http://www.oracle.com/technetwork/documentation/solaris-11-192991.html

112

Sun Server X4-4 Installation Guide • October 2015

Содержание Sun Server X4-4





















































































































































Отзывы:

Нет отзывов