Oracle Sun Server X4-4, Руководство по установке, Страница: 37 / 148

Attach Slide-Rail Assemblies
Note -
The slide rail assemblies support only racks with 9.5-mm square holes and M6 round
holes. All other racks, including those racks with 7.2-mm, M5, or 10-32 mounting holes, are not
supported. Refer to your rack documentation for information about the size of its rail holes.
To attach slide-rail assemblies to the rack:
1. (Optional) If you need to move the rack with the server installed, it is
recommended that you attach the slide-rail assembly with mounting screws and
cage nuts.
Refer to the Rail Rackmount Kit Overview and Information card for instructions on inserting
these cage nuts. This card is included with the rack kit.
2. Position a slide-rail assembly in your rack so that the slide-rail assembly front
bracket is on the outside of the front rack post and the slide-rail assembly rear
bracket is on the inside of the rear rack post.
3. Align the slide-rail assembly mounting pins with the front and rear rack post
mounting holes. Then lock the assembly into place by pushing the assembly
toward the rear of the rack until the mounting pins engage the rack.
Installing the Server Into a Rack 37