manualshive.com logo in svg

Oracle Sun Server X4-4, Руководство по установке, Страница: 18 / 148

Поделиться
Скачать
Oracle Sun Server X4-4 Скачать руководство пользователя страница 18

Server Supported Components

Component

Sun Server X4-4

■

Sun Storage 6 Gb SAS PCIe RAID HBA.

 Supports RAID levels : 0, 1, 1E, 10, 5,

5EE, 6 with Battery Backed Write Cache (BBWC).

USB 2.0 ports

■ Two ports on the front of the system and two on the back.
■ Two internal ports on the motherboard. One port holds the optional factory-installed

Oracle System Assistant (OSA) stick–a bootable device used to configure the server. A

second port can hold a USB flash device for system booting.

VGA ports

Two high-density DB-15 video ports are available. One on the front of the system and one on

the back. The server includes an embedded VGA 2D graphics controller with 8 MB, which

supports resolutions up to 1600 x 1200 x 16bits @ 60 Hz (1024 x 768 when viewed remotely

using Oracle ILOM Remote Console Plus RKVMS).

Note - 

The VGA port available on the back panel supports VESA Device Data Channel for

monitor identification.

PCI Express 3.0 I/O

slots

Eleven PCI Express 3.0 slots that accommodate low-profile PCIe cards. In configurations

that include a SAS HBA card, the HBA card is installed in slot 2. All slots support x8 PCIe

connections. Two slots are also capable of supporting x16 PCIe cards.

■ Slots 1 through 7, 9, and 10: x8 connector
■ Slots 8 and 11: x8 or x16 connector

Note - 

PCIe slots 7 through 11 are only functional in four CPU systems.

PCI Express I/O

cards

For a list of supported I/O cards for your system, refer to the 

Sun Server X4-4 Product Notes

.

Ethernet ports

Four 10 GbE RJ-45 Ethernet ports on back panel.

Service processor

Emulex Pilot 3 baseboard management controller (BMC) mounted on a daughterboard.

Supports industry-standard IPMI feature set.

Supports remote KVMS, USB, DVD, CD, floppy, and ISO image over IP.

Includes a serial port.

Supports Ethernet access to SP through a dedicated RJ-45 Gigabit Ethernet (10/100/1000)

management port and optionally through one of the host 10 GbE ports (sideband

management).

Power supplies

Two 1030/2060 Watt AC input auto-ranging hot-swappable power supplies.

Note - 

A two-CPU system can operate with low-line 100 - 127 VAC or high-line 200 - 240

VAC sources. A four-CPU system can only operate with high-line 200 - 240 VAC sources.

Cooling fans

Six hot-swappable, redundant fans at chassis front (top-loading); redundant fans in each

power supply.

Management

software

The following options are available:

■ Oracle Integrated Lights Out Manager (ILOM) on the service processor.
■ Oracle System Assistant (OSA) on an optional internal USB flash drive.
■ Oracle Hardware Management Pack on the optional OSA internal USB flash drive.
■ Oracle Enterprise Management Ops Center, downloadable from the Oracle site.

18

Sun Server X4-4 Installation Guide • October 2015

Содержание Sun Server X4-4





















































































































































Отзывы:

Нет отзывов