Oracle Sun Server X4-4 Скачать руководство пользователя страница 10

Страница: 10 / 148

Documentation and Feedback

■

My Oracle Support – This is the Oracle support web site located at:

https://support.

oracle.com

Documentation and Feedback

Documentation

Link

All Oracle products

http://docs.oracle.com

Sun Server X4-4

http://www.oracle.com/goto/X4-4/docs

Oracle Integrated Lights Out Manager (ILOM). Refer to

the documentation for your supported version of Oracle

ILOM listed in the

Product Notes

http://www.oracle.com/goto/ILOM/docs

Oracle Hardware Management Pack. Refer to the

documentation for your supported version of Oracle

Hardware Management Pack listed in the

Product Notes

http://www.oracle.com/goto/ohmp/docs

Provide feedback on this documentation at:

http://www.oracle.com/goto/docfeedback

About This Documentation

This documentation set is available in both PDF and HTML. The information is presented in

topic-based format (similar to online help) and therefore does not include chapters, appendixes,

or section numbering.

Support and Training

These web sites provide additional resources:

■

Support:

https://support.oracle.com

■

Training:

http://education.oracle.com

Contributors

Primary Authors: Ralph Woodley, Ray Angelo, Cynthia Chin-Lee, Mark McGothigan, Michael

Bechler, Lisa Kuder.

Sun Server X4-4 Installation Guide • October 2015

Содержание Sun Server X4-4





















































































































































Результаты поиска

Содержание Sun Server X4-4

Отзывы:

Oracle Sun Server X4-4, Руководство по установке, Страница: 10 / 148

Результаты поиска

Содержание Sun Server X4-4

Отзывы: