Oracle Sun Netra X4270, Руководство по обслуживанию

Страница: 143 / 238

Replacing Flash Modules
11.
If you replaced faulty DIMMs, clear the server DIMM faults.
a. To see server faults, log in to the ILOM SP as
root
and type the following
ILOM CLI command list all known fault on the system:
->
show /SP/faultmgmt
The server lists all known faults, for example:
-> show /SP/faultmgmt
Targets:
0 (/SYS/MB/P0/D2)
Properties:
Commands:
cd
show
b.
To clear the fault, type the following command:
->
set /SYS/MB/P
n
clear_fault_action=true
Where P n is the DIMM number. For example, to clear a fault on the DIMM in location D2
on CPU0:
-> set /SYS/MB/P0/D2 clear_fault_action=true
Are you sure you want to clear /SYS/MB/P0 (y/n)? y
Set ???clear_fault_action” to ???true???
Related Information
■
“DIMM and CPU Physical Layout” on page 133
■
“DIMM Population Rules” on page 134
■
“DIMM Considerations and Limitations” on page 135
■
“DIMM Rank Classification Labels” on page 136
■
“Error Correction and Parity” on page 136
■
“Identify and Remove Faulty DIMMs” on page 137
Replacing Flash Modules
The server contains two slots for flash modules. These topics describe how to remove and
install these flash modules.
Replacing Motherboard Assembly Components 143