Verify Card Status
Show the Vital Product Data Command
The
-showvpd
command is used to display the VPD information on the selected Sun Flash
Accelerator F80 PCIe Card.
The VPD (Vital Product Data) definitions are:
VPD Item
Definition
Product Name
Full description of the card
PN
Part Number
EC
ECO or Revision level
SN
Serial Number
VA
FRU shortname
Text Menu Interface Usage
: The following top-level menu lists the cards in the system and
prompts you to select a card on which to perform an operation. Four Sun Flash Accelerator F80
PCIe Cards are shown in the following example:
# ddcli
ID WarpDrive Package Version PCI Address
-- --------- --------------- -----------
1 ELP-4x200-4d-n 09.05.24.00 00:02:00:00
2 ELP-4x200-4d-n 09.05.24.00 00:03:00:00
3 ELP-4x200-4d-n 09.05.24.00 00:04:00:00
4 ELP-4x200-4d-n 09.05.24.00 00:05:00:00
Select the WarpDrive [1-4 or 0:Quit]: 1
1. List WarpDrive Information
2. Update Flash Package
3. Display WarpDrive Health
4. Locate WarpDrive
5. Format WarpDrive
6. Show Vital Product Data
7. Extract SMART Logs
Select Operation [1-7 or 0:Quit]: 6
Command Line Interface Usage:
Enter the following line of text in the CLI to run the
-
showvpd
command:
ddcli -c 1 -showvpd
.
Sample Output
: When the
-showvpd
command runs, the
ddcli
utility outputs the following
text.
# ddcli -showvpd
50
Sun Flash Accelerator F80 PCIe Card User's Guide • December 2013