Oracle Sun Fire X4800, Примечания к продукту, Страница: 79 / 92

Workaround 2 Using Oracle ILOM CLI
8.
Press ESC in the BIOS Setup Utility to boot the system.
Workaround 2 Using Oracle ILOM CLI
Before You Begin
Perform the following actions before upgrading your NEM firmware:
■
Download the firmware image for your server or CMM from the platform's product web
site. For details, see
https://support.oracle.com
.
■
Copy the firmware image to the system on which the web browser is running, using a
supported protocol (TFTP, FTP, HTTP, HTTPS).
■
Obtain an Oracle ILOM user name and password that has Administrator role account
privileges. You must have Administrator privileges to update the firmware on the system.
1. Restart the server and enter the BIOS screen.
When POST messages appear, press F2 to enter the BIOS the BIOS Setup Utility.
Note -
You do not need to configure anything in the BIOS the BIOS Setup Utility. It is used in
this procedure to ensure that the NEMs are powered-on but the OS does not boot.
2. Log in to the Oracle ILOM CMM CLI.
3.
Use the
cd
command to navigate to NEM0.
4. Type the show command to see the NEM properties, including the firmware
version.
The fru_extra_1 property field identifies the firmware version presently installed on the NEM.
If it is 5.3.3.4 or greater, you do not need to update your NEM firmware.
-> cd /SYS/NEM0
/SYS/NEM0
-> show
/SYS/NEM0
Targets:
PRSNT
STATE
ERR
OK
SERVICE
OK2RM
LOCATE
Oracle ILOM Enhancements and Issues 79