Oracle StorageTek T10000D Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 51

Oracle StorageTek T10000D Скачать руководство пользователя страница 46

Page 46 of 51

© Copyright 2017 Oracle Corporation

This document may be freely reproduced and distributed whole and intact including this Copyright notice.

7.

Enter a valid Agent ID, Pass Phrase, and OKM IP Address

8.

Press the “Commit” button

After pressing the “Commit” button, the ETD will reboot to normal operation.
From this point forward, the module will be operating in the Encryption Enabled
Approved Mode.

3.1.4 Permanent Encryption Approved Mode Set-Up

To place the StorageTek T10000D Tape Drive into the Permanent Encryption
Mode, the CO shall perform the following steps:

1.

Follow the steps outlined in Section 3.1.1 (

Initial Set-Up

2.

Using OKM, the CO shall add the ETD to the OKM cluster

3.

Set the drive to an “offline” state (Drive Operations



Set Offline)

4.

Using VOP, navigate to the “Encrypt” tab in the “Drive Data” window
(Configure



Drive Data)

5.

Set the “Use OKM or DPKM” Field to “OKM”

6.

Set the “Permanently encrypting” field to “Yes”

7.

Enter a valid Agent ID, Pass Phrase, and OKM IP Address

8.

Press the “Commit” button

After  pressing  the  “Commit”  button,  the  ETD  will  reboot  to  normal  operation.
From  this  point  forward,  the  module  will  be  operating  in  the  Permanent
Encryption  Approved  Mode.    Once  operating  in  this  mode,  the  module  will  be
unable to operate in any other Approved or Mixed modes.

3.1.5 Mixed Mode Set-Up

The CO can place the StorageTek T10000D Tape Drive into the Mixed Mode
after initially receiving the ETD. The CO shall perform the following steps:

1.

Follow the steps outlined in Section 3.1.1 (

Initial Set-Up

2.

Set the drive to an “offline” state (Drive Operations



Set Offline)

3.

Using VOP, navigate to the “Encrypt” tab in the “Drive Data” window
(Configure



Drive Data)

4.

Set the “Use OKM or DPKM” field to “DPKM”

5.

Press the “Commit” button

After pressing the “Commit” button, the ETD will reboot to normal operation.
From this point forward, the module will be operating in the Mixed Mode.

«
...
44
45
46
47
48
...
»

Содержание StorageTek T10000D




















































Отзывы:

Нет отзывов