Oracle StorageTek SL3000, Руководство пользователя

Страница: 28 / 216

Power Configurations
1-10 StorageTek SL3000 Library Guide
■
Required for redundant robotics and redundant electronics support
2N+1 power configuration
■
Offers both AC and DC power redundancy with additional DC redundancy
■
Consists of two PDUs (per Base module or DEM) for AC redundancy, with
additional DC power supplies for each PDU
■
Provides N+1 DC power redundancy for each PDU (except the second PDU only
has N DC power supply redundancy for the robot)
■
Requires two separate AC input sources per Base module or DEM
■
Supports redundant robotics and redundant electronics
DC Power Supplies
There are two types of DC power supplies:
■
Load sharing 1200W DC — used for the robotics unit and tape drives
■
200W cPCI — used for the electronics control module
Figure 1–7 Power Supply Locations - Base and DEM (Rear View)
Figure Legend:
1.
Robotics DC power supplies (1200W DC)
2.
Electronics module DC power supplies (200W cPCI)
3.
Tape drive DC power supplies (1200W DC)
4.
Power distribution unit (120 VAC or 240 VAC)