Oracle StorageTek SL3000, Руководство пользователя

Страница: 103 / 216

Importing/Exporting Diagnostic and Cleaning Cartridges
Managing Cartridges 11-3
7.
Click . . . to see details about the cartridge.
Importing/Exporting Diagnostic and Cleaning Cartridges
The library can perform only one diagnostic or cleaning cartridge import or export
operation at a time. The library controller reserves the CAP for the entire operation.
Before importing, verify the cartridge has the proper label. Diagnostic cartridges must
have DG as the first two characters of the eight character volume ID. Cleaning
cartridges must have CLN as the first three characters.
Importing Diagnostic and Cleaning Cartridges
1.
Verify that the library has enough empty reserved system slots. There must be at
least one empty system slot in the base and DEM for robot recovery or library
initialization (see
"Using Reserved System Slots" on page 11-5).
2.
Verify the CAP is empty, not reserved by a host, closed, and locked (see "Viewing
Device Status and Properties" on page 14-2).
3.
In SLC, select Tools > Diagnostics .
4.
Expand the CAP folder in the device tree, and then click a CAP to use.
5.
Click the Import/Export tab.
6.
In the Operation section, select Import Cleaning/Diagnostic cartridges .
7.
Click Start .
8.
Load the cartridges into the CAP (follow "Entering Cartridges Using a CAP" on
page 10-2 starting with step 2).
Exporting Diagnostic and Cleaning Cartridges
1.
Verify the CAP is empty, not reserved by a host, closed, and locked (see "Viewing
Device Status and Properties" on page 14-2).
2.
In SLC, select Tools > Diagnostics .
3.
Expand the CAP folder in the device tree, and then click a CAP to use.
4.
Click the Import/Export tab.
5.
Select a type of export operation. If exporting specific cartridges, select the
cartridges to export in the "Select Cartridges(s) to export" list.
6.
Click Start .
Caution: The library will consider a used cleaning cartridge to be
new, and set the usage counter to zero.
Note:
Only import cleaning cartridges using SLC if Auto Clean is
enabled (see "Enabling Drive Auto Cleaning" on page 9-1). For host
managed drive cleaning, import the cleaning cartridges using the host
software.