To Install Diagnostic Support for the Windows OS
Chapter 3 • Software Installation
37
■
Loopback test
■
Read/Write Buffer test
To Install Diagnostic Support for the Windows OS
1.
Go to the QLogic support site for Oracle at:
http://driverdownloads.qlogic.com/QLogicDriverDownloads_UI/Oracle_Search.aspx
2.
Locate the table containing the HBA model that you want (SG-
model-number
).
3.
At the bottom of the table, click Windows.
4.
Locate the SANsurfer CLI or SANsurfer PRO (GUI) diagnostic utility.
5.
Click Download to copy the diagnostic archive to a local file system.
6.
Click Readme for additional information.
Installing a CLI for Updating the BIOS and FCode
If you need to update the fibre channel BIOS and FCode, you can do so by using the SANsurfer
command-line interface (CLI).
If you have not done so already, you can download the SANsurfer CLI package from the
QLogic support site for Oracle at:
http://driverdownloads.qlogic.com/QLogicDriverDownloads_UI/Oracle_Search.aspx
Follow the installation instructions in the
README.TXT
file. Installation instructions are also
available in the QLogic document,
SANsurfer FC HBA CLI User's Guide
(SN0054614-00),
which can be found on the QLogic web site,
For instructions on how to update the BIOS and FCode, see the
SANsurfer FC HBA CLI User's
Guide
at the QLogic web site.
