manualshive.com logo in svg

Oracle SPARC T8-4, Руководство по обслуживанию

Oracle SPARC T8-4 - мощный сервер с высокой производительностью. Полный сервисный мануал доступен для бесплатного скачивания на нашем сайте. Получите подробную инструкцию по обслуживанию и настройке этого устройства, чтобы максимально эффективно использовать его возможности. Скачайте его с manualshive.com.

Поделиться
Скачать
background image

Référence: E80512-05

Copyright 

©

 2017, 2022, Oracle et/ou ses affiliés.

Ce logiciel et la documentation qui l'accompagne sont protégés par les lois sur la propriété intellectuelle. Ils sont concédés sous licence et soumis à des restrictions d'utilisation et

de divulgation. Sauf stipulation expresse de votre contrat de licence ou de la loi, vous ne pouvez pas copier, reproduire, traduire, diffuser, modifier, accorder de licence, transmettre,

distribuer, exposer, exécuter, publier ou afficher le logiciel, même partiellement, sous quelque forme et par quelque procédé que ce soit. Par ailleurs, il est interdit de procéder à toute

ingénierie inverse du logiciel, de le désassembler ou de le décompiler, excepté à des fins d'interopérabilité avec des logiciels tiers ou tel que prescrit par la loi.

Les informations fournies dans ce document sont susceptibles de modification sans préavis. Par ailleurs, Oracle Corporation ne garantit pas qu'elles soient exemptes d'erreurs et vous

invite, le cas échéant, à lui en faire part par écrit.

Si ce logiciel, ou la documentation qui l'accompagne, est livré sous licence au Gouvernement des Etats-Unis, ou à quiconque qui aurait souscrit la licence de ce logiciel pour le

compte du Gouvernement des Etats-Unis, la notice suivante s'applique :

U.S. GOVERNMENT END USERS: Oracle programs (including any operating system, integrated software, any programs embedded, installed or activated on delivered hardware,

and modifications of such programs) and Oracle computer documentation or other Oracle data delivered to or accessed by U.S. Government end users are "commercial computer

software" or "commercial computer software documentation" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, the

use, reproduction, duplication, release, display, disclosure, modification, preparation of derivative works, and/or adaptation of i) Oracle programs (including any operating system,

integrated software, any programs embedded, installed or activated on delivered hardware, and modifications of such programs), ii) Oracle computer documentation and/or iii) other

Oracle data, is subject to the rights and limitations specified in the license contained in the applicable contract. The terms governing the U.S. Government's use of Oracle cloud

services are defined by the applicable contract for such services. No other rights are granted to the U.S. Government.

Ce logiciel ou matériel a été développé pour un usage général dans le cadre d'applications de gestion des informations. Ce logiciel ou matériel n'est pas conçu ni n'est destiné à

être utilisé dans des applications à risque, notamment dans des applications pouvant causer un risque de dommages corporels. Si vous utilisez ce logiciel ou matériel dans le cadre

d'applications dangereuses, il est de votre responsabilité de prendre toutes les mesures de secours, de sauvegarde, de redondance et autres mesures nécessaires à son utilisation dans

des conditions optimales de sécurité. Oracle Corporation et ses affiliés déclinent toute responsabilité quant aux dommages causés par l'utilisation de ce logiciel ou matériel pour des

applications dangereuses.

Oracle et Java sont des marques déposées d'Oracle Corporation et/ou de ses affiliés. Tout autre nom mentionné peut correspondre à des marques appartenant à d'autres propriétaires

qu'Oracle.

Intel et Intel Inside sont des marques ou des marques déposées d'Intel Corporation. Toutes les marques SPARC sont utilisées sous licence et sont des marques ou des marques

déposées de SPARC International, Inc. AMD, Epyc, et le logo AMD sont des marques ou des marques déposées d'Advanced Micro Devices. UNIX est une marque déposée de The

Open Group.

Ce logiciel ou matériel et la documentation qui l'accompagne peuvent fournir des informations ou des liens donnant accès à des contenus, des produits et des services émanant de

tiers. Oracle Corporation et ses affiliés déclinent toute responsabilité ou garantie expresse quant aux contenus, produits ou services émanant de tiers, sauf mention contraire stipulée

dans un contrat entre vous et Oracle. En aucun cas, Oracle Corporation et ses affiliés ne sauraient être tenus pour responsables des pertes subies, des coûts occasionnés ou des

dommages causés par l'accès à des contenus, produits ou services tiers, ou à leur utilisation, sauf mention contraire stipulée dans un contrat entre vous et Oracle.

Accessibilité de la documentation

Pour plus d'informations sur l'engagement d'Oracle pour l'accessibilité de la documentation, visitez le site Web Oracle Accessibility Program, à l'adresse : 

http://www.oracle.com/

pls/topic/lookup?ctx=acc&id=docacc

.

Accès aux services de support Oracle

Les clients Oracle qui ont souscrit un contrat de support ont accès au support électronique via My Oracle Support. Pour plus d'informations, visitez le site 

http://www.oracle.com/

pls/topic/lookup?ctx=acc&id=info

 ou le site 

http://www.oracle.com/pls/topic/lookup?ctx=acc&id=trs

 si vous êtes malentendant.

Содержание SPARC T8-4













































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SPARC T8-4

Aastra 400 Series System Manual preview
400 Series
Бренд: Aastra Страницы: 592
Gateway 7250R Rack Mounting Instructions preview
7250R
Бренд: Gateway Страницы: 26
IBM Flex System x440 Compute Node Installation And Service Manual preview
Flex System x440 Compute Node
Бренд: IBM Страницы: 584
Acrosser Technology ANR-C62-N1 Series Manual preview
ANR-C62-N1 Series
Бренд: Acrosser Technology Страницы: 57
IBM @server xSeries 343 Product Manual preview
@server xSeries 343
Бренд: IBM Страницы: 193
IBM 8668 - Eserver xSeries 232 Hardware Maintenance Manual preview
8668 - Eserver xSeries 232
Бренд: IBM Страницы: 182
Kraun Video Server User Manual preview
Video Server
Бренд: Kraun Страницы: 36
Antrica ANT-35000A User Manual preview
ANT-35000A
Бренд: Antrica Страницы: 68
McIntosh MS750 Service Manual preview
MS750
Бренд: McIntosh Страницы: 12
McIntosh MS750 Owner'S Manual preview
MS750
Бренд: McIntosh Страницы: 52
Axis AXIS 240 User Manual preview
AXIS 240
Бренд: Axis Страницы: 129
Viavi G4-40G-040-384T Manual preview
G4-40G-040-384T
Бренд: Viavi Страницы: 12
Red Hat DIRECTORY SERVER 7.1 Installation Manual preview
DIRECTORY SERVER 7.1
Бренд: Red Hat Страницы: 96
Redline RDL-2000 User Manual preview
RDL-2000
Бренд: Redline Страницы: 50
Supero AS-1011S-MR2 User Manual preview
AS-1011S-MR2
Бренд: Supero Страницы: 98
Supero AS-4021M-82R Plus User Manual preview
AS-4021M-82R Plus
Бренд: Supero Страницы: 106
Supero AS-1021M-T2+ User Manual preview
AS-1021M-T2+
Бренд: Supero Страницы: 106
Uniwide AR3016G Hardware User'S Manual preview
AR3016G
Бренд: Uniwide Страницы: 96

Бренды по названию

Популярные бренды

Загрузить еще бренды