manualshive.com logo in svg

Oracle SPARC T8-4, Руководство по обслуживанию

Oracle SPARC T8-4 - мощный сервер с высокой производительностью. Полный сервисный мануал доступен для бесплатного скачивания на нашем сайте. Получите подробную инструкцию по обслуживанию и настройке этого устройства, чтобы максимально эффективно использовать его возможности. Скачайте его с manualshive.com.

Поделиться
Скачать
background image

SPARC T8-4 Server Service Manual

Part No: E80512-05

Copyright 

©

 2017, 2022, Oracle and/or its affiliates.

This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except

as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform,

publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is

prohibited.

The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.

If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, then the following notice is applicable:

U.S. GOVERNMENT END USERS: Oracle programs (including any operating system, integrated software, any programs embedded, installed or activated on delivered hardware,

and modifications of such programs) and Oracle computer documentation or other Oracle data delivered to or accessed by U.S. Government end users are "commercial computer

software" or "commercial computer software documentation" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, the

use, reproduction, duplication, release, display, disclosure, modification, preparation of derivative works, and/or adaptation of i) Oracle programs (including any operating system,

integrated software, any programs embedded, installed or activated on delivered hardware, and modifications of such programs), ii) Oracle computer documentation and/or iii) other

Oracle data, is subject to the rights and limitations specified in the license contained in the applicable contract. The terms governing the U.S. Government's use of Oracle cloud

services are defined by the applicable contract for such services. No other rights are granted to the U.S. Government.

This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous

applications, including applications that may create a risk of personal injury. If you use this software or hardware in dangerous applications, then you shall be responsible to take all

appropriate fail-safe, backup, redundancy, and other measures to ensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this

software or hardware in dangerous applications.

Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.

Intel and Intel Inside are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks or registered trademarks of

SPARC International, Inc. AMD, Epyc, and the AMD logo are trademarks or registered trademarks of Advanced Micro Devices. UNIX is a registered trademark of The Open Group.

This software or hardware and documentation may provide access to or information about content, products, and services from third parties. Oracle Corporation and its affiliates are

not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services unless otherwise set forth in an applicable agreement

between you and Oracle. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content,

products, or services, except as set forth in an applicable agreement between you and Oracle.

Documentation Accessibility

For information about Oracle's commitment to accessibility, visit the Oracle Accessibility Program website at 

http://www.oracle.com/pls/topic/lookup?ctx=acc&id=docacc

.

Access to Oracle Support

Oracle customers that have purchased support have access to electronic support through My Oracle Support. For information, visit 

http://www.oracle.com/pls/topic/lookup?

ctx=acc&id=info

 or visit 

http://www.oracle.com/pls/topic/lookup?ctx=acc&id=trs

 if you are hearing impaired.

Diversity and Inclusion

Oracle is fully committed to diversity and inclusion. Oracle recognizes the influence of ethnic and cultural values and is working to remove language from our products and

documentation that might be considered insensitive. While doing so, we are also mindful of the necessity to maintain compatibility with our customers' existing technologies and the

need to ensure continuity of service as Oracle's offerings and industry standards evolve. Because of these technical constraints, our effort to remove insensitive terms is an ongoing,

long-term process.

Содержание SPARC T8-4













































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SPARC T8-4

NEC NECCare Platinum Express5800/A1160 Brochure & Specs preview
NECCare Platinum Express5800/A1160
Бренд: NEC Страницы: 4
NEC NECCare Gold Express5800/320Fd Maintenance And Service Manual preview
NECCare Gold Express5800/320Fd
Бренд: NEC Страницы: 11
NEC NEC Express5800/R120d-2E Configuration Manual preview
NEC Express5800/R120d-2E
Бренд: NEC Страницы: 39
NEC UNIVERGE NEAX 2000 IPS Manual preview
UNIVERGE NEAX 2000 IPS
Бренд: NEC Страницы: 244
NEC UNIVERGE NEAX 2000 IPS General Description Manual preview
UNIVERGE NEAX 2000 IPS
Бренд: NEC Страницы: 191
NEC UNIVERGE NEAX 2000 IPS Configuration Manual preview
UNIVERGE NEAX 2000 IPS
Бренд: NEC Страницы: 96
H3C UniServer T1100 G3 Operating System Installation Manual preview
UniServer T1100 G3
Бренд: H3C Страницы: 66
H3C UniServer R6900 G3 User Manual preview
UniServer R6900 G3
Бренд: H3C Страницы: 214
H3C UniServer R6700 G3 User Manual preview
UniServer R6700 G3
Бренд: H3C Страницы: 151
H3C UniServer R4900 G5 Installation, Quick Start preview
UniServer R4900 G5
Бренд: H3C Страницы: 16
Sun Oracle Sun Blade T6340 Installation And Administration Manual preview
Sun Blade T6340
Бренд: Sun Oracle Страницы: 82
IBM e Server iSeries 825 Manual preview
e Server iSeries 825
Бренд: IBM Страницы: 52
American Megatrends StorTrends 1312-P Specifications preview
StorTrends 1312-P
Бренд: American Megatrends Страницы: 2
Aaeon AIOT-ILRA01 User Manual preview
AIOT-ILRA01
Бренд: Aaeon Страницы: 38
MSI E7210 Master-FARM User Manual preview
E7210 Master-FARM
Бренд: MSI Страницы: 34
Supero SuperServer 6024H-82 User Manual preview
SuperServer 6024H-82
Бренд: Supero Страницы: 122
Supero SUPERSERVER 5015M-NT User Manual preview
SUPERSERVER 5015M-NT
Бренд: Supero Страницы: 134
IBM X 330 Series Installation Manual preview
X 330 Series
Бренд: IBM Страницы: 76

Бренды по названию

Популярные бренды

Загрузить еще бренды