Oracle SG-EMFCOE2-Q-SR, Руководство по установке

Страница: 64 / 70

vpd r/w failed
Error Messages Are Displayed
■
Operating Protocol Mode of Universal HBA: FC, CNA
■
Environment: Universal HBA connected directly to supported storage
Issue:
LACP cannot be used on the same port as FCoE or iSCSI.
Workaround:
None.
vpd r/w failed
Error Messages Are Displayed
CR 20084365, 19154195
Conditions:
■
Operating System: Any operating system (OS) based on Red Hat Linux 5.9 or greater,
including, but not limited to, Oracle Enterprise Linux 5.9 OS with Unbreakable Enterprise
Kernel (UEK) 3, RHEL 6.6 OS, or OVM 3.3.1
■
Operating Protocol Mode: CNA and HBA
■
Environment: Universal HBA installed in an x86 system, during functional check
procedures
Issue:
If you are using any operating system based on the Red Hat Linux operating system, you might
receive “vpd r/w failed” messages upon issuing functional check commands, such as
dmesg
and
lspci
.
Workaround:
None. Ignore these messages as they do not adversely affect the functionality of the universal
HBA.
Error Message Occurs After Running the
cfgadm -c
configure ap-id
Script
Bug 15750655
Issue:
64 Sun Storage 10 GbE FCoE ExpressModule Converged Network Adapter From QLogic Installation Guide For Adapter
Models SG-EMFCOE2-Q-SR, SG-XEMFCOE2-Q-SR, SG-EMFCOE2-Q-TA, SG-XEMFCOE2-Q-TA, and 7101682 •
January 2017