Oracle netra X5-2, Руководство по установке

Страница: 97 / 152

Refer to the Oracle® Communications Session Border Controller Configuration Guide after
you have completed this deployment for administrative and service configuration, including
product setup, entitlement setup and HA configuration.
Create and Deploy on Azure
You can deploy the Oracle Communications Session Border Controller (OCSBC) on Azure
public clouds. Azure provides multiple ways of managing your environment(s), including via
its web portal, using its powershell and its CLI interfaces. This document focuses on the
portal. The portal provides navigation via a web-page pane with links to specified functions on
the left side of portal pages. These procedure also assume you have reviewed Azure
documentation, and can access portal pages and navigation.
Deployment detail specific to Azure includes:
• VM Interfaces—An initial instance deployment creates only a single (wancom0) network
interface with an ACL for inbound SSH and HTTP/HTTPS access only. You add
additional media interfaces after initial deployment.
• Interface Types—Use Para-Virtual interfaces for both management and media/signaling
ports.
• Virtual Hard Disk (VHD) Size—The OCSBC default disk size for Azure is 20G. Use the
formula, (2xRAM)+2+2+8 GB, and reconfigure the disk size during deployment if you
plan on using the /sys and /app partitions or if you have larger RAM and disk
requirements for your deployment.
• Console Selection—Use the serial console as the default device because Azure does not
support a virtualized VGA console at startup.
• Cloud Detection—The OCSBC show platform command includes the cloud field, which,
when applicable, shows the detected cloud environment, including Azure.
Note:
Azure auto-fills the target Subscription, Resource Group, Region and Location
fields. These components are deployment-specific and used in some Azure
configuration components. You may need to specify them if your cloud environment
includes multiples of these components, which you would have defined prior to
instance deployment.
Prerequisites to Deploying an Azure Instance
You can create some of the objects required during the instance deployment procedure prior
to or during that deployment. When created prior to instance deployment, these objects
become selectable, typically from drop-down lists in the appropriate deployment dialogs. You
may use these objects for a single deployment or for multiple deployments.
Tasks denoted here as OCSBC instance deployment prerequisites include:
• You have identified and are deploying to or via the correct Azure:
– Subscription
– Region
Chapter 7
Create and Deploy on Azure
7-31