manualshive.com logo in svg

Oracle Netra SPARC, Руководство администратора

Поделиться
Скачать
Oracle Netra SPARC Скачать руководство пользователя страница 58

Restore the Host Power State at Restart

■

enabled

 – Server cools certain components before powering off.

■

disabled

 – Component temperatures are not monitored during power off.

Related Information

■

“Power Off the Server (Oracle ILOM Web Interface)” on page 26

■

“Power Off the Server (Oracle ILOM CLI)” on page 24

Restore the Host Power State at Restart

Use the 

/SP/policy HOST_LAST_POWER_STATE

 property to control the behavior of the server

after an unexpected power outage. When external power is restored, the Oracle ILOM SP starts

to run automatically. Normally, the host power is not turned on until you use Oracle ILOM to

turn it on.

Oracle ILOM records the current power state of the server in nonvolatile storage. If the

HOST_LAST_POWER_STATE

 policy is enabled, Oracle ILOM can restore the host to the previous

power state. This policy is useful in the event of a power failure, or if you physically move the

server to a different location.

For example, if the host server is running when power is lost and the 

/SP/policy

HOST_LAST_POWER_STATE

 property is set to 

disabled

, the host server remains off when power is

restored. If the 

/SP/policy HOST_LAST_POWER_STATE

 property is set to 

enabled

, the host server

restarts when the power is restored.

At the Oracle ILOM prompt, type:

-> 

set /SP/policy HOST_LAST_POWER_STATE=enabled

where 

value

 can be:

■

enabled

 – When power is restored, returns the server to the state it was in before the power

was removed.

■

disabled

 – (Default) Keeps the server off when power is applied.

If you enable 

HOST_LAST_POWER_STATE

, you should also configure 

/SP/policy

HOST_POWER_ON_DELAY

. See 

“Disable or Reenable the Host Power-On Delay” on page 59

.

Related Information

■

“Disable or Reenable the Host Power-On Delay” on page 59

58

SPARC and Netra SPARC T5 Series Servers Administration Guide • August 2016

Содержание Netra SPARC













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды