Oracle Netra SPARC S7-2, Руководство по обслуживанию, Страница: 173 / 258

Locate a Faulty PCIe Card
See “Front Panel Components (Service)” on page 17 and “Interpreting LEDs” on page 30 .
2. In Oracle ILOM, verify that each PCIe card is recognized.
-> show /System/PCI_Devices/Add-on
/System/PCI_Devices/Add-on
Targets:
Device_
x
Device_
y
...
->
where x , y , etc, are the slot numbers where PCIe cards are installed.
3. To verify that a single PCIe card is identified, type:
-> show /System/PCI_Devices/Add-on/Device_
x
where x is the slot number where the PCIe card is installed.
If a PCIe card is not recognized, check its installation.
See
“Install a PCIe Card” on page 176 .
4. Verify that a PCIe card is faulty.
For example, type:
-> show faulty
Target | Property | Value
--------------------+------------------------+-------------------------------
/SP/faultmgmt/0 | fru | /SYS/MB/PCIE1
...
->
where y is
0
to
6
.
■
If a PCIe card is faulty, you will see
/SYS/MB/PCIE
y under the
Value
heading.
■
If a FRU value different from
/SYS/MB/PCIE
y is displayed, see “Component Service Task
Reference” on page 47 to identify which component is faulty.
5. Use the Oracle ILOM
faultmgmt
shell to identify the faulty component.
See “Identify Faulted Components” on page 27 .
Check the
Fault class
and
Description
fields for more information.
6. If a PCIe card is faulty, replace it.
Servicing PCIe Cards 173