•
Prepares the Oracle FS System
for component replacement. For FRUs and
CRUs that require you to bring the chassis offline, Guided Maintenance
issues commands to redirect activity from a failed component to a
redundant component and then brings the chassis offline.
•
Displays replacement procedures for the failed FRU or CRU. For hot-
serviceable FRUs and CRUs, Guided Maintenance presents a sequence of
dialogs with the replacement steps. For FRUs or CRUs that require you to
bring the chassis offline, Guided Maintenance provides a link to
documentation containing the replacement steps.
Note:
Only administrator accounts set up with support role privileges can access
Guided Maintenance to replace FRUs.
Providing accurate system status and replacing FRUs and CRUs are complex
operations that involve many lower level components within the system. The
Oracle FS System is designed to be maintained without requiring support from
Oracle Customer Support.
Each FRU and CRU has its own diagnostics, which are called by the Pilot to
verify that a FRU or CRU is accessible and functioning properly. The diagnostics
are primarily used to verify FRUs and CRUs that have been added or replaced.
The system also tracks parts that have failed and have been removed to prevent
re-insertion of failed components. Diagnostics run automatically when you
replace a FRU or CRU.
Accessing Procedures on a Mobile Device
Each HTML Guided Maintenance page provides a QR code. Scan the QR code to
access the replacement procedures on your mobile device. Make sure your
mobile device has a QR code reader installed. QR code readers are available as
free downloads from App stores.
Guided Maintenance Replaceable Components
Depending upon the type of component being replaced, Guided Maintenance
provides different interfaces to help guide you through the replacement process.
Controller and Drive Enclosure Replaceable Components
For hot-serviceable Controller and Drive Enclosure components, Guided
Maintenance presents a sequence of dialogs with the component replacement
instructions. Follow the instructions in Guided Maintenance to replace the
following hot-serviceable Controller and Drive Enclosure components:
Introduction to Oracle FS1-2 System Service Procedures
34
