Oracle F320, Руководство пользователя, Страница: 35 / 56

Install a New Oracle F320 Flash Card (Server Power-On)
c.
Verify successful installation of the Oracle F320 Flash Card through your
systems OS.
Upon completed installation, the Oracle Flash Accelerator F320 PCIe Card is visible to
your server operating system.
d.
Configure the system to maximize flash technology.
Refer to the servers administration guide.
Related Information
■
“Product Overview” on page 9
■
“Installation Overview” on page 31
■
“Oracle F320 Flash Card Service Overview” on page 39
Install a New Oracle F320 Flash Card (Server Power-On)
To install a new Oracle Flash Accelerator F320 PCIe Card into a supported server when the
card is hot plug inserted into an empty PCIe carrier:
Note -
Refer to the servers service manual for PCIe card installation instructions.
1. Prepare the Oracle F320 Flash Card for installation.
See “Preparing the Oracle F320 Flash Card for Installation” on page 23 .
2. Back up your data, as required, before changing your server configuration.
3. Identify a supported and available PCIe carrier in the server.
Refer to the servers service manual for PCIe carrier and slot locations in the server.
Refer to
“Supported Hardware and Software” in Oracle Flash Accelerator F320 PCIe Card and
Oracle 3.2 TB NVMe SSD Product Notes .
4. Prepare the server for service.
a. Refer to the servers service manual for instructions.
b. Remove the domain from active operation, as required.
Installing the Oracle F320 Flash Card 35