Oracle Exalytics In-Memory Machine страница 81 Скачать руководство пользователя

Страница: 81 / 85

For more information, see the Knowledge Management article ID 1329200.1 on My
Oracle Support. To obtain this article on My Oracle Support, complete the following
steps:

https://support.oracle.com

Click the Knowledge tab.

In the Knowledge Base section, click the Search & Browse tab.

In the Enter search terms option, enter 1329200.1 and click Search. The article
"How to activate ASR within My Oracle Support" is displayed.

9.9 Sending Test Alerts

To send test alerts, complete the following:

root

user.

Send Test Alerts for ILOM telemetry by running the following command:

#ipmitool sunoem cli "set /SP/alertmgmt/rules/1 testrule=true"

Send Test Alerts for Exalytics host machine by running the following command:

#./opt/exalytics/asr/bda_mon_hw_asr.pl -validate_snmp_subscriber -type asr

You will receive an e-mail notification for the test alerts.

Note:

Oracle highly recommends to send test alerts from the ILOM, and the
Exalytics host machine.

9.10 Fault Coverage

For more information, see

Oracle ASR ILOM documentation

Chapter 9

Sending Test Alerts

9-7

Содержание Exalytics In-Memory Machine






















































































Результаты поиска

Содержание Exalytics In-Memory Machine

Отзывы:

Похожие инструкции для Exalytics In-Memory Machine

Бренды по названию

Популярные бренды

Oracle Exalytics In-Memory Machine, Руководство пользователя

Результаты поиска

Содержание Exalytics In-Memory Machine

Отзывы:

Похожие инструкции для Exalytics In-Memory Machine

Бренды по названию

Популярные бренды