Oracle Exalogic Elastic Cloud, Руководство пользователя

Страница: 160 / 342

4.
Run the following command to verify the VNICs:
# showvnics
The following message is displayed:
ID STATE FLG IOA_GUID NODE IID MAC VLN PKEY GW
--- -------- --- ----------------------- ---------- ---- -------------
8 UP N 00:21:28:00:01:A0:A3:65 computenode1 EL-C 192.168.10.29 0000
a2:c0:a0:a8:1:1 10 ffff 1A-ETH-3
9 UP N 00:21:28:00:01:A0:A3:65 computenode1 EL-C 192.168.10.29 0001
a2:c0:a0:a8:1:a 11 ffff 1A-ETH-3
Tip:
After creating the interfaces, you can run the
ifconfig
command with the
-
a
option to verify the MAC address on the compute node. For example, to
verify the new interface and its MAC address, run the following command on
the Oracle Linux compute node for which the VNIC was created:
# ifconfig -a eth4
The output of this command shows the
HWADDR
, which is the MAC address
you defined for the VNIC in Set Up Ethernet Over InfiniBand (EoIB) on Oracle
Linux .
5.
If you want your VNIC configuration to persist across reboots, you should save
VNIC configuration to a file. For information about doing this on Oracle Linux,
see Set Up Ethernet Over InfiniBand (EoIB) on Oracle Linux for more information.
Be sure to create a bonded interface comprising two VNICs on Oracle Linux, for
high availability purposes.
11.5 Oracle Solaris: Creating VNICs and Associating Them with VLANs
If you wish to associate a VNIC with a VLAN, you should provide a VLAN identifier
when mapping the MAC address.
To create a VNIC and associate with a VLAN, use the following example procedure:
1.
On the gateway switch CLI, as
root
, complete one of the following procedures
depending on the OS version:
• steps 1 to 15 as described in Set Up Ethernet Over InfiniBand on Oracle Solaris
11.1
• steps 1 to 13 as described in Set Up Ethernet Over InfiniBand on Oracle Solaris
11.2
This procedure creates a VNIC, such as
eoib0
.
2.
On Oracle Solaris, VLAN-tagged VNICs may only be created from the Oracle
Solaris compute node. Run one of the following procedures depending on the OS
version:
• step 16 in Set Up Ethernet Over InfiniBand on Oracle Solaris 11.1
• steps 10 and 13 in Set Up Ethernet Over InfiniBand on Oracle Solaris 11.2
3.
You can verify that the VNICs were created by running one of the following
procedures depending on the OS version:
Oracle Solaris: Creating VNICs and Associating Them with VLANs
11-4 Oracle Exalogic Elastic Cloud Machine Owner's Guide