Oracle EXADATA X5-2 Скачать руководство пользователя страница 224

Страница: 224 / 262

BIOS IO Menu Selections

TABLE 32

BIOS IO Menu I/OAT Configuration Options

Setup Options

Options

Defaults

Description

Intel I/OAT

Disabled/Enabled

Enabled

Enable or disable Intel I/

OAT.

DCA Support

Disabled/Enabled

Enabled

Enable or disable direct

cache access (DCA)

support.

BIOS IO Menu Internal Devices Options

The following table describes the BIOS IO Menu internal devices options:

TABLE 33

BIOS IO Menu Internal Devices Options

Setup Options

Options

Defaults

Description

NET0

Displays and provides

options to change the

internal device settings.

OpROM Enable

Disabled/Enabled

Enabled

Enable or disable Option

ROM. If set to enabled,

Option ROM for the card

executes as normal. If

set to disabled, Option

ROM for the card is not

copied into memory and

the execution of the Option

ROM is inhibited.

NET1, NET2, and NET3

See NET0 description.

BIOS IO Menu Add In Cards Options

The following table describes the BIOS IO Menu add in cards options.

TABLE 34

BIOS IO Menu Add In Cards Options

Setup Options

Options

Defaults

Description

Slot 1

Displays and provides

options to change the

settings of the devices in

PCIe slots.

OpROM Enable

Disable/Enabled

Enabled

Enable or disable Option

ROM for add-in card.

224

Oracle Exadata Storage Server X5-2 High Capacity Service Manual • January 2018

Содержание EXADATA X5-2







































































































































































































































































Результаты поиска

Содержание EXADATA X5-2

Отзывы:

Бренды по названию

Популярные бренды

Oracle EXADATA X5-2, Руководство по обслуживанию

Результаты поиска

Содержание EXADATA X5-2

Отзывы:

Бренды по названию

Популярные бренды