Oracle EXADATA X5-2 Скачать руководство пользователя страница 130

Страница: 130 / 262

Servicing the Front LED/USB Indicator Modules

Return the server to operation.

Install the top cover.

See

“Install the Server Top Cover” on page 161

Return the server to the normal rack position.

See

“Return the Server to the Normal Rack Position” on page 165

Connect any required data cables to the PCIe card.

Route data cables through the cable management arm.

Reconnect the power cords to the power supplies and power on the server.

See

“Reconnect Power and Data Cables” on page 167

and

“Power On the

Server” on page 167

. Verify that the AC OK LED is lit.

Use Oracle ILOM to clear any server PCIe card faults.

You can use the Oracle ILOM web interface or the command-line interface (CLI) to manually

clear faults. For information on how to use the Oracle ILOM web interface or the CLI to clear

server faults, see the Oracle Integrated Lights Out Manager (ILOM) 3.2 Documentation Library

at:

http://www.oracle.com/goto/ilom/docs

Related Information

■

“Remove the Sun Storage 12 Gb/s SAS PCIe RAID HBA Card” on page 124

Servicing the Front LED/USB Indicator Modules

Caution -

Ensure that all power is removed from the server before removing or installing a

front LED/USB indicator module. You must disconnect the power cables before performing this

procedure.

This section covers the following topics:

■

“Remove the Left LED Indicator Module” on page 131

■

“Install the Left LED Indicator Module” on page 135

130

Oracle Exadata Storage Server X5-2 High Capacity Service Manual • January 2018

Содержание EXADATA X5-2







































































































































































































































































Результаты поиска

Содержание EXADATA X5-2

Отзывы:

Бренды по названию

Популярные бренды

Oracle EXADATA X5-2, Руководство по обслуживанию

Результаты поиска

Содержание EXADATA X5-2

Отзывы:

Бренды по названию

Популярные бренды