Table 3-3 (Cont.) Customer Network Configuration Page
Customer Details Field
Description
VLAN ID
This field is displayed only when the
Advanced Options button is clicked.
For the Admin network, the VLAN ID is a
numeric value between 1 and 4079. If this field
is empty, then VLAN is not enabled.
For the Client network, the VLAN ID is a
numeric value between 1 and 4095. You also
need to select the "Bonded" option to enable
VLAN. If the VLAN ID field is empty, then
VLAN is not enabled.
For the Backup network, the VLAN ID is a
numeric value between 1 and 4095. If the
VLAN ID field is empty, then VLAN is not
enabled. If the Backup network uses VLAN,
then the Client network must also be
configured to use VLAN. You also need to
select the "Bonded" option for the Backup
network to enable VLAN.
If the backup network shares the same cable
as the client network, ensure that:
•
the "Share Client Network ports" box is
selected, and
•
the "Network Format" is the same type for
both client and backup networks.
Note that for all networks, the customer is
responsible for configuring VLAN on the
switch.
Note:
Each IP address pool should consist of consecutive IP addresses. If
consecutive IP addresses are not available, then modify the IP addresses at
the end of the Oracle Exadata Deployment Assistant process.
3.2.6 Administration Network Configuration Page
Each database server and Exadata Storage Server has two network interfaces for
administration. One network provides management access to the operating system
through the Ethernet interface, and the other network provides access to the
Integrated Lights Out Manager (ILOM) through the ILOM Ethernet interface.
The following table lists the administration network fields. Sample host name formats
are shown, based on the prefix entered on the Customer Details page. To modify the
name formats, click Modify.
Chapter 3
OEDA Graphical User Interface
3-10
