Oracle Exadata Storage Server X7-2 EF, Руководство по обслуживанию

Страница: 111 / 284

Servicing PCIe Cards
This section describes how to service PCIe cards. PCIe cards are replaceable, hot-pluggable
units that do not require you to power off the server. For more information about replaceable
units, see “Illustrated Parts Breakdown” on page 22 and “Replaceable Units” on page 23 .
Refer to your PCIe card documentation for complete software and cabling information about
your card.
Caution - Customers must not use the procedures in this section to service the Oracle Storage
12 Gb SAS PCIe RAID HBA, Internal card that is located in PCIe slot 11 or the Oracle Flash
Accelerator F640 6.4 TB add-in SSD cards (HC only). These cards must be serviced only by
authorized Oracle Service personnel.
Caution -
These procedures require that you handle components that are sensitive to
electrostatic discharge. This sensitivity can cause the components to fail. To avoid
damage, ensure that you follow antistatic practices as described in “Take Antistatic
Measures” on page 63 .
Caution -
Ensure that all power is removed from the server before removing or installing
PCIe cards. You must disconnect all power cables from the system before performing these
procedures. The Oracle Dual Port QDR InfiniBand Adapter M4 card is not hot-pluggable and
therefore you need to power off the server before you remove the card.
Note -
For a complete list of supported PCIe cards, refer to the Oracle Server X7-2L Product
Notes at
http://www.oracle.com/goto/x7-2l/docs
.
This section covers the following procedures:
■
“PCIe Slot Locations” on page 112
■
“Remove a PCIe Card” on page 113
■
“Install a PCIe Card” on page 115
Servicing PCIe Cards 111