Oracle Exadata Storage Server X7-2 EF, Руководство по установке

Страница: 36 / 90

Rack Compatibility
Rack Compatibility
The rack into which you install Oracle Exadata Storage Server X7-2L must meet the
requirements listed in the following table. Oracle Rack Cabinet 1242 and Sun Rack II are
compatible with both servers. For information about the racks, see “Preparing for Server
Installation” on page 13 .
Item Requirement
Structure ■ Four-post rack (mounting at both front and back).
Supported rack types: square hole (9.5 mm) and
round hole (M6 or 1/4-20 threaded only).
■ Two-post racks are not compatible.
Rack horizontal opening and unit vertical pitch Conforms to ANSI/EIA 310-D-1992 or IEC 60297
standards.
Distance between front and back mounting planes Minimum 61 cm and maximum 91.5 cm (24 inches to 36
inches).
Clearance depth in front of front mounting plane Distance to front cabinet door is at least 2.54 cm (1 inch).
Clearance depth behind front mounting plane Distance to back cabinet door is at least 90 cm (35.43
inches) with the cable management arm, or 80 cm (31.5
inches) without the cable management arm.
Clearance width between front and back mounting planes Distance between structural supports and cable troughs is
at least 45.6 cm (18 inches).
Minimum clearance for service access ■ Clearance, front of server: 123.2 cm (48.5 inches)
■ Clearance, back of server: 91.4 cm (36 inches)
The following table contains Sun Rack II Model 1242 and Sun Rack II Model 1042 rack
specifications.
Requirement Specification
Usable rack units 42
Height 199.8 cm (78.66 inches)
Width (with side panels) 60 cm (23.62 inches)
Depth Model 1242
†
120 cm (47.24 inches)
Depth Model 1042
‡
105.8 cm (41.66 inches)
Weight Model 1242 150.6 kg (332 lbs)
Weight Model 1042 123.4 kg (272 lbs)
Maximum dynamic load 1005 kg (2215 lbs)
†
Depth is measured from front door handle to back door handle.
36 Oracle Exadata Storage Server X7-2 EF and HC Installation Guide • November 2018