Oracle DE2-24 Скачать руководство пользователя страница 299

Страница: 299 / 312

How to Resolve Health Check Alerts

ID and Alert Log Message

Failure

Resolution Steps

"System software update cannot

proceed: Pool <data

log> disk

<label> in disk shelf <name> has

<just one path

zero paths>."

Disk or log device that is configured

in a pool does not have two paths.

3, 4

PAN1

"Slot <slot> has a Revision B3

SAS HBA; Revision C0 (or later)

required."

A revision B3 SAS HBA is present.

PAN2

"J4400 and J4500 disk shelves

are not supported in this release."

Disk shelf/shelves are present that

are not supported for this software

release.

"<product> is not supported in

this release."

Controller (product) is not supported

for this software release.

How to Resolve Health Check Alerts

Use the following procedure to resolve health check alerts.

If a SAS port LED is unlit, check all connections and replace cables as needed.

Identify affected chassis, then disconnect and remove faulted SIM or IOM.

After two minutes, re-seat SIM or IOM and wait for steady Power LED before

reconnecting cables.

Identify affected chassis, and remove faulted disk. After 30 seconds, re-seat disk

and wait for steady or flashing LED.

Contact Oracle Support for component service or replacement.

Applying Deferred Updates

Each update may come with new firmware or updates to external resources. In general, these

updates are backwards-compatible and applied automatically without user intervention. There

are exceptions, however, for non-reversible updates. These updates involve updating a resource

external to the system software in a way that is incompatible with older software releases. After

the update is applied, rolling back to previous versions results in undefined behavior. For these

updates, you are always given an explicit option of applying them automatically during upgrade

or applying them after the fact. They are, therefore, referred to as "deferred updates."

When applying an update to a version with incompatible version changes, you are given an

option to apply these version changes as part of the upgrade. For each version change, the

benefits of applying the change are presented to you. The default is to not apply them, requiring

Maintaining the System

299

Содержание DE2-24

























































































































































































































































































































Результаты поиска

Содержание DE2-24

Отзывы:

Бренды по названию

Популярные бренды

Oracle DE2-24, Руководство по обслуживанию клиентов

Результаты поиска

Содержание DE2-24

Отзывы:

Бренды по названию

Популярные бренды