Oracle Database Appliance X3-2, Руководство по обслуживанию

Страница: 146 / 188

Resetting the Service Processor
146 Oracle Database Appliance Service Manual • February 2016
Diagnostic Tool What It Does Where to Find Information
to work together. Patches are available
through My Oracle Support.
Oracle ILOM
Preboot Menu
The Oracle ILOM preboot menu is a utility
that can be used to fix problems with Oracle
ILOM that cannot be fixed while it is
running. It allows you to interrupt the Oracle
ILOM boot process, configure settings, then
continue booting Oracle ILOM. Among
other things, it allows you to reset the Oracle
ILOM root password to factory defaults,
restore Oracle ILOM access to the serial port.
Refer to the appropriate Oracle x86 Servers
Diagnostics Guide based on your appliance's
supported version of Oracle ILOM.
http://www.oracle.com/goto/
x86AdminDiag/docs
System indicators
and LEDs
Provides at-a-glance status of the system and
its components.
■ Chapter 1, “Overview of System Status
Indicators and LEDs”
■ Oracle Integrated Lights Out Manager
(ILOM) Documentation Library
Power-On Self-Test
(POST)
Tests core components of system: CPUs,
memory, and motherboard I/O bridge
integrated circuits.
■ “Default BIOS Power-On Self-Test
(POST) Events” on page 151
■ “BIOS POST F1 and F2
Errors” on page 153
U-Boot Initializes and test aspects of the SP prior to
booting Oracle ILOM. Tests SP memory, SP,
network devices and I/O devices.
Refer to the appropriate Oracle x86 Servers
Diagnostics Guide based on your appliance's
supported version of Oracle ILOM.
http://www.oracle.com/goto/
x86AdminDiag/docs
Pc-Check DOS-based utility that tests all motherboard
components (CPU, memory, and I/O), ports,
and slots.
Refer to the appropriate Oracle x86 Servers
Diagnostics Guide based on your appliance's
supported version of Oracle ILOM.
http://www.oracle.com/goto/
x86AdminDiag/docs
Resetting the Service Processor
There are times when you might need to reset the service processor (such as after a firmware
update). You can reset the server node SP using Oracle ILOM without affecting the host OS.
However, this action disconnects your current Oracle ILOM session and will not allow any new
sessions to be initiated until the reset has completed.
To reset the SP using the Oracle ILOM web interface or the CLI, see Oracle Integrated Lights
Out Manager (ILOM) Documentation Library :
http://www.oracle.com/goto/ILOM/docs