Oracle Acme Packet 6100, Руководство по установке оборудования, Страница: 92 / 114

Table 6 - 9. Hardware Temperature Alarm Information
Alarm Name
Alarm
ID
Alarm Severity Causes Example Log Message
Graphic Display Window
Message
TEMPERATURE
HIGH 65538 CRITICAL: >105°C
MINOR: >95°C
Fans are obstructed
or stopped. The room
is abnormally hot. Temperature: XX.XXC
(where XX.XX is the
temperature in
degrees) Temperature X C (where X
is the temperature in
degrees)
If this alarm occurs, the Acme Packet 6100 turns the fan speed up to the fastest possible speed.
84 Acme Packet 6100 Hardware Installation Guide
Fan Speed Alarms The following table lists the fan speed alarm.
Table 6 - 10. Fan Speed Alarm
1
Information
Alarm Name
Alarm
ID
Alarm Severity
2 Causes
Example Log
Message
Graphic Display
Window Message
FAN STOPPED 65537 CRITICAL: any fan speed is operating at
<50%. Or speed of two or more fans are
operating at >50% and <75%.
MINOR: speed of one fan is operating
between >75% and <90%, while the other
two fans are operating at normal speed.
Fan failure. Fan speed: XXXX
XXXX XXXX
where xxxx xxxx
xxxx is the Revolu-
tions per Minute
(RPM) of each fan
on the fan module Fan stopped
1. If the fan speed alarm occurs, the Acme Packet 6100 turns the fan speed up to the fastest possible speed.
2. The stated percentages are relative to the fan operating speed. Fan speeds adapt to the load as necessary.
Environmental Sensor
Alarm The following table lists the environmental sensor alarm.
Table 6 - 11. Environmental Sensor Alarm Information
Alarm Name
Alarm
ID
Alarm Severity Cause(s) Example Log Message
Graphic Display
Window Message
ENVIRONMENTAL
SENSOR FAILURE 65539 CRITICAL The environmental sen-
sor component cannot
detect fan speed and
temperature. Hardware monitor fail-
ure! Unable to monitor
fan speed and tempera-
ture! HW Monitor Fail
MAJOR: >100°C
MAJOR: speed of two or more fans is
operating at >75% and <90%. Or speed of
one fan is operating between >50% and
<75% and the other two fans are
atoperating at normal speed.