Oracle Acme Packet 6100, Руководство по установке оборудования

Страница: 77 / 114

Acme Packet 6100 Hardware Installation Guide 69
Fan and Filter Maintenance
This section explains how to remove a fan and replace the filter on your Acme
Packet 6100.
Removing and
Replacing
Individual Fans
The individual fan is a user-serviceable, hot-swappable component. There are
five individual fans in the Acme Packet 6100. If the Acme Packet 6100
experiences a fan malfunction, you must remove the existing fan and replace
it with a functional one.
The hot-swappable fan removal and replacement procedures require that you
have a replacement fan on hand. In order to maintain system operations, you
must be able to remove the malfunctioning fan and quickly replace it with a
functioning one to prevent the system from overheating.
The Acme Packet 6100 air filter is located behind the Bezel and is a Field
Replaceable Unit.
Caution An over temperature condition can stop packet processing.
If you do not have a replacement fan nearby, always shut down the system and
disconnect the power before removing the malfunctioning fan to replace at a
later time.
When removing and replacing a fan, remember to first ground yourself using
appropriate ESD grounding equipment such as a wrist or heel strap.
To remove one of the five individual fans:
1. Press two fingers against the left end of the plastic fan bezel and pull
directly toward you. The fan bezel comes off the chassis. Set the fan bezel
aside. The individual fans are now exposed.
Figure 6 - 95. Removing the Front Bezel