Oracle Acme Packet 6100, Руководство по установке оборудования

Страница: 39 / 114

Acme Packet 6100 Hardware Installation Guide 31
console connector, reset button, graphic display buttons, and physical
interface card slots.
• Do not block the air inlets or the fan module, or obstruct airflow to the
system in any way.
• Position equipment to allow for serviceability. This will aid in chassis
removal, and prevent the need to remove or loosen other equipment in the
rack.
•
Remember that the Ethernet interfaces are limited to 328 feet/100 meters
as defined by the FAST Ethernet standard, IEEE 802.3.
Other Safety
Guidelines
When preparing to install your Acme Packet 6100, ensure you follow these
safety guidelines:
•
Review the all safety precautions with respect to the Acme Packet 6100
before beginning installation.
•
Ensure that the equipment rack is securely bolted to the floor and that the
equipment rack and components are properly grounded.
•
For AC power installations, use a regulating UPS to protect the Acme
Packet 6100 from power surges, voltage spikes, and power failures.
•
For AC power installations, ensure that your UPS can supply power for
enough time to save your system data and shut down the system
gracefully.
Mounting Installation
Overview
This section explains how to unpack and install your Acme Packet 6100 into a
telecommunications or server equipment rack. The Acme Packet 6100
standard mounting hardware is used for installation in a 4-post, 19” cabinet-
style equipment rack. Mounting hardware for a 23” equipment rack is
available by special order.
Mounting Options The Acme Packet 6100 ships with hardware for mounting in a 4-post, tapped-
hole equipment rack or square-hole equipment rack. The Acme Packet 6100
also ships with hardware for mounting in a 2-post, center-mount equipment
rack. This section explains the procedures for each mounting option.
Caution Failure to follow the instructions outlined in this section
might compromise the proper function of the Acme Packet
6100. To prevent personal injury, Acme Packet recommends
that two people lift and install the chassis into the equipment
rack.