System access in the following procedure uses the default User and Superuser
passwords. If you do not have the default passwords, please contact customer
support.
1.
At the ACLI Password prompt, enter the default system User password and press
<return>. Your entries are not echoed on the screen.
User Access Verification
Password:
ACMEPACKET>
From the User prompt you can view various configuration states and operating
statistics on the Acme Packet 4600 and perform configuration tasks.
2.
Type enable and press <return> to enter Superuser mode. The prompt to enter
the Superuser password appears.
ACMEPACKET> enable
Password:
3.
Enter the Superuser password and press <return>. The system prompt will end
with a pound sign instead of a closed-angle-bracket to let you know are in
Superuser mode.
Password:
ACMEPACKET#
4.
You can now begin configuring your Acme Packet 4600. Refer to the Acme Packet
Configuration Guide to learn how to establish an IP address for your Acme Packet
4600.
If you have any questions about booting or powering on your system, please contact
customer support.
Formatting the Solid State Drive
After the initial log on to the device, you must format the Solid State Drive. Details
on file system designs and the formatting procedure may be found in Chapter 9, File
System Maintenance of the Maintenance and Troubleshooting Guide for your software
release.
Chapter 5
Powering On the Acme Packet 4600 System
5-3