7
Specifications
This chapter provides information regarding the physical, electrical, environmental,
and connector specifications of the Acme Packet 4600 System.
Environmental, Safety, and Regulatory Certifications
For information regarding safety and regulatory certifications applicable to the Acme
Packet 4600, refer to the Acme Packet Platforms Safety and Compliance Guide.
Physical Specifications
Acme Packet 4600 System Chassis Specifications
This table lists the physical dimensions and weight of the Acme Packet 4600 chassis.
Specification
Description
Height
1.72” (4.37 cm) (1U)
Width
17.10” (43.43 cm) (+ mounting ear width: 19”
(43.18 cm))
Depth
20” (48.26 cm) (+ mounting slide bar depth)
Weight
approximately 20.5 lbs (9.30 kg), fully loaded
AC Power Supply Physical Dimensions
This table lists the physical dimensions and weight of the Acme Packet 4600 AC
power supply.
Specification
Description
Height
1.575” (4.00 cm)
Width
2.146” (5.45 cm)
Depth
13.26” (33.68 cm)
Weight
2lbs., 5 oz. (1.05 kg)
Note:
This equipment is intended for installation in locations where National
Electrical Code (NEC) applies.
7-1