Removing the Hardware
Before flashing the FCode, install the latest QLogic/Oracle Solaris Converged Network Adapter
driver. Then copy the multi-boot binary file
Q8Qxxyyy.BIN
on the Oracle SPARC system under
the
root(/)
directory.
For procedures on updating FCode using the SANsurfer utilities, refer to the QLogic SANsurfer
FC HBA Manager help system and the
SANsurfer FC HBA CLI User's Guide
.
Removing the Hardware
If you need to remove the adapter, for any reason, follow the instructions in this section. For
more detailed removal instructions, see your system installation or service manual.
The following steps summarize the hardware removal process:
1. Halt the operating system and remove power from the system, as required by your system.
2. Remove the adapter hardware.
To Remove the Converged Network Adapter
1.
Use an ESD strap (refer to
2.
Refer to your system documentation to shut down, power off, and unplug the
system, if necessary.
3.
Disconnect all cables.
4.
Unscrew the case screws and remove the system case.
5.
Remove the mounting bracket of the adapter from the system by unscrewing the
panel screw or removing the clip, whichever is being used.
You can now remove the adapter.
Chapter 2 • Hardware Installation and Removal
39
Содержание 7105381
Страница 2: ......