Copyright © 2014, Oracle and/or its affiliates. All rights reserved.
Copyright © 2014, Oracle et/ou ses affiliés. Tous droits réservés.
The 1.6TB solid state drive (SSD) is used in multiple
brackets) depending on the system. Replacement SSDs are shipped with two different types of
these differences.
The SSD included in this kit is assembled with the drive carrier that is
When replacing an SSD in an Oracle FS System Drive Enclosure
replacement SSD with the drive carrier that is compatible with the DE2
Kit Contents
•
One 1.6TB SSD pre-installed in a drive carrier
•
One empty drive carrier required to install the 1.6TB SSD
•
Five Phillips Number 1 screws (four required
•
One overlay label that contains the new assembly part number
Required Tools
•
Phillips Number 1 screwdriver
Replace the Drive Carrier
NOTE
: Before removing a failed SSD drive from a Drive Enclosure, be sure to install the new SSD into the drive carrier that is
compatible with the DE2-24P Drive Enclosure.
1.
To remove the SSD from the pre-installed
Common 1.6TB
SSD Kit
7087210
multiple Oracle storage systems that require different drive carriers (also known as
. Replacement SSDs are shipped with two different types of drive carriers to accommodate
The SSD included in this kit is assembled with the drive carrier that is compatible with the Oracle ZFS Storage ZS3
System Drive Enclosure, you must exchange the drive carrier pre
compatible with the DE2-24P Drive Enclosure. Please read the instructions below.
carrier that is compatible with the Oracle ZFS Storage ZS3
to install the 1.6TB SSD in the DE2-24P Drive Enclosure
screws (four required screws and one screw provided as a spare)
verlay label that contains the new assembly part number
drive from a Drive Enclosure, be sure to install the new SSD into the drive carrier that is
24P Drive Enclosure.
installed drive carrier, unscrew the four screws as shown in the following graphic
Part No. 7087210
March 2014
1.6TB
different drive carriers (also known as
carriers to accommodate
Oracle ZFS Storage ZS3-2 server.
pre-installed on the
Please read the instructions below.
that is compatible with the Oracle ZFS Storage ZS3-2 server
drive from a Drive Enclosure, be sure to install the new SSD into the drive carrier that is
in the following graphic:
