Opvimus NS-CAN, Руководство по эксплуатации

Страница: 5 / 23

Noise sensor for
COMPACT SYSTEM
NS-CAN
NS-CAN version 3.2.001
5
3. CAN BUS ADDRESS CONFIGURATION
Using SW1 DIP switches assigns an address to the sensor.
Every noise sensor connected to the same bus must have a
different CAN address. Values must be between 0 and 15.
4. CONNECTION
4.1. CAN Bus connection between NS-CAN and COMPACT unit
To COMPACT unit
NS-CAN
Figure 3. CAN address configuration
Figure 4
ATTENTION: For the connection of the CAN bus it is recommended to use a shielded twisted pair AWG24 cable
(Not connected)
(Bus
C
AN
)
24V DC
Power supply