Opvimus IF-7W120DCETH, Руководство по эксплуатации

Страница: 20 / 52

IF-7WDCETH version 5.2.001 ENG
20
Class D wall-mounted amplifier
with IP connection
IF-7WDCETH
4ETH
7. TECHNICAL CHARACTERISTICS
7.1. IF-7WDCETH
Ethernet communication
2 Ethernet connections (RJ45) A and B for redundant installations. IP Layer 3 & Layer 4
Network.
CAN bus Speed: 33,333kbit/s
VoIP
SIP protocol RFC3261.
G711 (PCMA and PCMU), G722 and L16 coding.
Input contacts 3 input contacts. Configurable NC/NO.
Output contacts
3 output contacts. Configurable NC/NO.
1 FAIL Relay. Max. DC load current: 150 mA. Max. load voltage DC or AC peak: 350V.
Audio outputs 1 audio output for loudspeaker line (100V).
Maximum output level 100V
Frequency response (-3dB) 100 Hz - 18 kHz
Total harmonic distortion (preamp) < 0.1 % (1 kHz)
Signal-to-noise ratio Better than 85 dB
Internal SD memory
16 GB, for storage of pre-recorded messages. Supports audio files in WAV / MP3 / OGG
format.
Controls
IP channels: Volume, bass and treble or 10-band graphic equaliser (30Hz / 60Hz /
125Hz / 250Hz / 500Hz / 1KHz / 2KHz / 4KHz / 8KHz / 16KHz) via software.
Power supply Full range 100-240 V.c.a. and 24VDC
Consumption (idle) 15W
Indicators
Indicator lights GENERAL FAULT, SYSTEM FAULT, EMERGENCY and GRAL. POWER
(mainboard power).
Weight 2.9 kg
Finishes Black painted iron RAL9005.
Dimensions (mm) 142.5 (width) x 105 (height) x 332.4 (depth)
7.2. SPECIFICATIONS INTERNAL AMPLIFIER MODULE
Model IF-7W60DCETH IF-7W120DCETH IF-7W150DCETH IF-7W250DCETH IF-7W300DCETH IF-7W460DCETH
Amplifier type CLASS D
Energy efficiency 90%
Power output 60W 120W 150W 250W 300W 460W
Leds POWER, STANDBY, PROTECT, CLIP and SIGNAL
Fan No No No No Yes Yes
THD+N (@1kHz) <0.5 <0.5% <0.5% <0.5% <0.5% <0.5%
Consumption Standby
Idle
Max
3.5W
6W
70W
3.5W
6.5W
134W
4W
7.2W
165W
4W
7W
276W
4W
7.2W
339W
4W
7.2W
520W